All ABOUT
OUR
Publications
Journal article
논문
<국제논문>
45. HTL- & ETL-free metal–semiconductor–metal structure organic solar cells
S.j. Park, H.N. Tran, H.j. Lee, S. Lee, Y.W. Lee, J.H. Lee, J.n. Roe, M.m. Jahandar, N.K. Wardani, J.Y. Kim, J.H. Seo, H.-Y.Jeong,
E.-c. Jeon, Y.S. Park, S.y. Kim, B.S. Kim, D.C. Lim, S.u. Cho,
EES Solar (2026)
44. Improving bending fatigue lifetime and interfacial adhesion of Cu–Mn flexible interconnects using self-forming nanolayer
S.g. Lee, J.-M. Shin, J.-S. Lee, D.H. Kim, E.-c. Jeon, Y.-C. Joo, S.-Y. Lee, B.-J. Kim,
Nanotechnology Reviews (2026)
43. Manufacturing of a Bitmap-Type Lightweight Microwave Absorber Metasurface
J.-R. Lee, M.j. Kim, S.H. Moon, D.-S. Choi, J.h. Shin, I.S. Kang, T.-J. Je, E.-c. Jeon*,
International Journal of Precision Engineering and Manufacturing (2025)
42. Analysis of Crack Parameters and Electrical Property in Flexible Devices Under Bending State
D.-H. Kim, J.-Y. Kwak, J.-Y. Kim, E.-c. Jeon*,
Electronic Materials Letters (2025)
41. Ultrathin Yet Effective: 90 nm ZnF2 Layer for Stabilizing Zinc−Metal Anodes
V. P. Nguyen, M.j. Park, Y.-W. Byeon, S.i. Lim, K.h. Yim, M.s. Oh, S.m. Hyun, E.-c. Jeon*, and S.-M. Lee,
ACS Energy Letters (2025)
40. Nanoindentation Study on Depth‑Dependent Hardness and Embrittlement of He Ion‑Irradiated Fe–9Cr Alloy
H.-Y. Jeong, S.H. Lee, S.B. Lee, D.-s. Chang, J.G. Lee, E.-c. Jeon*,
Metals and Materials International (2025)
39. Advancing high-efficiency, stretchable organic solar cells: novel liquid metal electrode architecture
S.B. Lee, S.J. Oh, S.S. H, D.C. Lee, J.H. Lee, Y.H. Kim, H.-Y. Jeong, J.-W. Lee, M.-H. Lee, W.B. Ying, S.J. Jeong, S.J. Lee, J.H. kim,
B.J. Kim, E.-c. Jeon, T.-S, Kim, S.N. Cho, J.-Y. Lee,
Energy & Environmental Science (2024)
38. Melt-quenched carboxylate metal–organic framework glasses
M.H. Kim, H.-S. Lee, D.-H. Seo, S.J. Cho, E.-c. Jeon*, H.R. Moon,
Nature Communications (2024)
37. Manufacturing of stretchable substrate with biaxial strain control for highly-efficient stretchable solar cells and displays
J.-Y. Kwak, J.-Y. Jeong, Y.-P. Kwon, D.-H. Seo, C.-M. Kang, D.-H Kim, J.S. Han, E-J Gwak, D.-S Choi, J.Y. Kim, T.-J. Je, E.-c. Jeon*,
Scientific Reports 13.1 (2023)
36. Ultrawide meta-film replication process for the mass production of a flexible microwave absorbing meta-surface
J.S. Han, H.j. Park, J.-Y. Jeong, J.k. Jung, E.-J. Gwak, E.-c. Jeon, T.-J. Je, J.H. Shin, D.-S. Choi,
Optics Express (2022)
35. Highly impermeable and flexible silica encapsulation films synthesized by sol-gel process
S.-H. Kim, G.-S. Hwang, D.w. Koo, D.-H. Seo, Y.-P. Kwon, H.s. Lee, H.s. Park, E.-c. Jeon*, J.-Y. Kim,
Nano Research (2022)
34. Manufacturing of Compound Parabolic Concentrator Devices Using an Ultra-fine Planing Method for Enhancing Efficiency of a Solar Cell
H.-J. Choi, C.s. Cho, S.w. Woo, J.-Y. Lee, Y.-E. Yoo, M.w. Jeon, G.-H. Kim, T.-J. Je, E.-c. Jeon*,
International Journal of Precision Engineering and Manufacturing-Green Technology (2021)
33. Fabrication and characterization of resistive double square loop arrays for ultra-wide bandwidth microwave absorption
J.-Y. Jeong, J.-R. Lee, H.j. Park, J.k. Jung, D.-S. Choi, E.-c. Jeon, J.h. Shin, J.S. Han, T.-J. Je,
Scientific Reports (2021)
32. Graphene Antiadhesion Layer for the Effective Peel-and-Pick Transfer of Metallic Electrodes toward Flexible Electronics
G.j. Jeong, J.h. Seo, Y.c. Kim, D.H. Seo, J.M. Baik, E.-c. Jeon*, G.s. Lee, H.s. Park,
ACS Applied Materials & Interfaces (2021)
31. Manufacture of microscale random pattern using indentation machining technology
J.-R. Lee, S.H. Moon, T.-J. Je, D.-S. Choi, H. Kim, E.-c. Jeon*,
International Journal of Precision Engineering and Manufacturing-Green Technology (2020)
30. Ultralow-dielectric-constant amorphous boron nitride
S.m. Hong, C.-S. Lee, M.-H. Lee, Y.d. Lee, K.Y. Ma, G.w. Kim, S.I. Yoon, K.w. Ihm, K.-J. Kim, T.J. Shin, S.W. Kim, E.-c. Jeon,
H.s. Jeon, J.-Y. Kim, H.I. Lee, Z.h. Lee, A. Aleandro, R. Stephan, C. Manish, H.J. Shin, H.S. Shin,
Nature (2020)
29. Micromirror-Embedded Coverslip Assembly for Bidirectional Microscopic Imaging
D.w. Lee, J.h. Kim, E.j. Song, J.-Y. Jeong, E.-c. Jeon, P.h. Kim, W.h. Lee,
Micromachines (2020)
28. Inertial focusing in triangular microchannels with various apex angles
J.-a. Kim, A. Kommajosula, Y.-h. Choi, J.-R. Lee, E.-c. Jeon, B. Ganapathysubramanian, W.h. Lee,
Biomicrofluidics (2020)
27. Electrodeposited Silver Nanowire Transparent Conducting Electrodes for Thin-Film Solar Cells
S.y. Lee, J.s. Jang, T.j. Park, Y.M. Park, J.S. Park, Y.-K. Kim, H.-K. Lee, E.-c. Jeon, D.-K. Lee, B.m. Ahn, C.-H. Chung,
ACS applied materials & interfaces (2020)
26. Effects of the Surface Contact on the Uncertainly in Indentation Yield Strength: Surface Roughness and Angular Misalignment
O.M. Kwon, J.h. Won, J.-h. Kim, C.h. Cho, E.-c. Jeon*, D.i. Kwon,
Metals and Materials International (2019)
25. Selective crack suppression during deformation in metal films on polymer substrates using electron beam irrradiation
S.-Y. Lee, K.R. Park, S.-g. Kang, J.-H. Lee, E.c. Jeon, C.-H. Shim, J.-P. Ahn, D.-I. Kim, H.N. Han, Y.-C. Joo, C.s. Kim, I.-S. Choi,
Nature communications (2019)
24. "Enhancement of optical resolution in three dimensional refractive-index tomograms of biological samples by employing micromirror-embedded coverslips
S.w. Shin, J.h. Kim, J.-R. Lee, E.-c. Jeon, T.-J. Je, W.h. Lee, Y.K. Park,
Lab on a Chip (2018)
23. Geometric and Wave Optic Features in the Optical Transmission Patterns of Injection-molded Mesoscale Pyramid Prism Patterned Plates
J.-R. Lee, T.-J. Je, S.w. Woo, Y.-E. Yoo, J.-H. Jeong, E.-c. Jeon*, H. Kim,
Current Optics and Photonics (2018)
22. Size-Dependent Inertial Focusing Position Shift and Particle Separations in Triangular Microchannels
J.-a. Kim, J.-R. Lee, T.-J. Je, E.-c. Jeon*, W.h. Lee,
Analytical chemistry (2018)
21. Off-centered Double-slit Metamaterial for Elastic Wave Polarizon Anomaly
H.J. Lee, J.-R. Lee, S.H. Moon, T.-J. Je, E.-c. Jeon, K.y. Kim, Y.Y. Kim,
Scientific reports (2017)
20. Fabrication of an Anisotropic Superhydrophobic Polymer Surface Using Compression Molding and Dip Coating
K.-M. Lee, C.-V. Ngo, J.-Y. Jeong, E.-c. Jeon, T.-J. Je, D.-M. Chun,
Coatings (2017)
19. Study on ductile mode machining of single-crystal silicon by mechanical machining
D.-H. Choi, J.-R. Lee, N.-R. Kang, T.-J. Je, J.-Y. Kim, E.-c. Jeon*,
International Journal of Machine Tools and Manufacture (2017)
18. A New Application of Dynamic Indentation: Indentation Machining Technology
E.-c. Jeon*, J.-R. Lee, D.-H. Choi, H.-J. Choi, T.-J. Je,
Experimental Mechanics (2017)
17. Ductile Mode Machining of the Micro Pattern Made on YSZ Using Ultra-precision Shaping with a Diamond Tool
H.J. Choi, E.-c. Jeon, T.-J. Je, J.-H. Kim, D.-H. Choi, B.S. Shin, W.-C. Jung, Y.-H. Lee,
Journal of the Korean Physial Society (2015)
16. Optical Characterization and Manufacturing of an Optical Plate for Increasing Light Efficiency of LED Systems
J.-R. Lee, E.-c. Jeon*, H. Kim, S.-W. Woo, T.-J. Je, Y.-E. Yoo, E.-S. Lee,
International Journal of Precision Engineering and Manufacturing (2015)
15. Material Removal of Glass by Magnetorheological Fluid Jet
W.-B. Kim, E.s. Nam, B.-K. Min, D.-S. Choi, T.-J. Je, E.-c. Jeon,
International Journal of Precision Engineering and Manufacturing (2015)
14. Toward Perfect Light Trapping in Thin-Film Photovoltaic Cells: Full Utilization of the Dual Characteristics of Light
C.s. Cho, S.j. Jeong, H.-J. Choi, N.r. Shin, B.S. Kim, E.-c. Jeon, J.-Y. Lee,
Advanced Optical Materials (2015)
13. Quantitative Analysis on Air-Dispensing Parameters for Manufacturing Dome Lenses of Chip-on-Board LED System
E.-c. Jeon*, J.-R. Lee, T.-J. Je, D.-S. Choi, Y.-B. Ham, E.-S. Lee, S.-K. Choi, H. Kim,
International journal of precision engineering and manufacturing (2014)
12. Micro-Cutting with Diamond Tool Micro-Patterned by Femtosecond Laser
J.g. Kim, T.-J. Je, S.-H. Cho, E.-c. Jeon, K.-H. Whang,
International journal of precision engineering and manufacturing (2014)
11. Transmission-type photonic crystal structures for color filters
H.-J. Choi, S.j. Choi, Y.-E. Yoo, E.-c. Jeon, Y. Yi, S.w. Park, D.-S. Choi, H. Kim,
Optics express (2013)
10. Optimization of Hybrid LED Package System for Energy Saving Based on Micro Machining Technology and Taguchi Method
E.-c. Jeon*, T.-J. Je, E.-S. Lee, E.-S. Park, J.-R. Lee, H.j. Choi, S.h. Chang, S.-K. Choi,
International Journal of Precision Engineering and Manufacturing (2013)
9. Evaluation of indentation tensile properties of Ti alloys by considering plastic constraint effect
K.-H. Kim, Y.-C. Kim, E.-c. Jeon, D.i. Kwon,
Materials Science and Engineering (2011)
8. Improvement of machining quality of copper-plated roll mold by controlling temperature variation
T.-J. Je, E.-c. Jeon, S.-C. Park, D.-S. Choi, K.-H. Whang, M.-C. Kang,
Transactions of Nonferrous Metals Society of China (2011)
7. A Method for Estimating Uncertainly of Indentation Tensile Properties in Instrumented Indentation Test
E.-c. Jeon*, J.-S. Park, D.-S. Choi, K.-H. Kim, D.i. Kwon,
Journal of engineering materials and technology (2009)
6. High-Modulus Spin-On Organosilicate Glasses for Nanoporous Applications
H.W. Ro, K.h. Char, E.-c. Jeon, H.-J. Kim, D.i. Kwon, H.-J. Lee, J.-K. Lee, H.-W. Rhee, Christopher L. Soles, D.Y. Yoon,
Advanced Materials (2007)
5. Optimum definition of true strain beneath a spherical indenter for deriving indentation flow curves
E.-c. Jeon*, J.-Y. Kim, M.-K. Baik, S.-H. Kim, J.-S. Park, D.i. Kwon,
Materials science and Engineering (2006)
4. Determining Brinell Hardness From Analysis of Indentation Load-Depth Curve Without Optical Measurement
S.-H. Kim, E.-c. Jeon, D.i. Kwon,
J. Eng. Mater. Technol (2005)
3. Determining Representative Stress and Representative Strain in Deriving Indentation Flow Curves Based on Finite Element Analysis
E.-c. Jeon*, M.K. Baik, S.H. Kim, B.W. Lee, D.i. Kwon,
Key Engineering Materials (2005)
2. Statistical Analysis of Experimental Parameters in Continusous Indentation Tests Using Taguchi Method
E.-c. Jeon*, J.-S. Park, D.i. Kwon,
J. Eng. Mater. (2003)
1. Derivation tensile flow properties of thin films using nanoindentation technique
J.-H. Ahn, E.-c. Jeon, Y. Choi, Y.-H. Lee, D.i. Kwon,
Current applied physics (2002)
<국내논문>
33. Analysis of Adhesion Force and Adhesive Energy of Ag Thin Films under Pressure Conditions Using Nanoscratch Test
Y.K. Park, J.-H. Choi, D.-G. Choi, J.-Y. Jung, E.-c. Jeon,
Applied Chemistry for Engineering (2024)
32. A Study on the Effects of the Nano-/Micro-scale Machining Processing Characteristics on the Load Applied to a Metal Thin Film Surface
I.-H. Jo, S.-H. Lee, S.Y. Kim, M.-J. Kum, H.-I. Hwang, K.O. Kim, E.-c. Jeon, J.H. Kim,
Journal of the Korean Society of Manufacturing Process Engineers (2023)
31. Analysis of the Correlation between the Theoretical and Measured Surface Roughness Values of Difficult-to-Cut Materials Subjected to Drilling
H.-S. Lee, D.-H. Seo, H.H. Lee, J.H. Kim, E.-c. Jeon,
Jounal of the Korean Society of Manufacturing Process Engineers (2023)
30. Optimization of the Stretchability Evaluation Method of Stretchable Devices by Minimizing External Effects
D.-H. Kim, J.-Y. Kwak, E.-c. Jeon,
Journal of the Korean Society of Manufacturing Process Engineers (2022)
29. Effects of cutting Parameters on Surface Roughness in Planing Using Taguchi Method
D.-H. Seo, Y.-P. Kwon, Y.-J. Kim, H.-J. Choi, E.-c. Jeon,
Journal of the Korean Society of Manufacturing Process Engineers (2021)
28. Evaluation of the Curvature Reliability of Polymer Flexible Meta Electronic Devices based on Variations of the Electrical Properties
J.-Y. Kwak, J.-Y. Jeong, J.-A. Ju, Y.-P. Kwon, S.-H. Kim, D.-S. Choi, T.-J. Je, J.S. Han, E.-c. Jeon,
Applied Chemistry for Engineering (2021)
27. Analysis of Variation of Specific Cutting Resistance in Nanoscale Cutting
Y.-P. Kwon, S.-H. Kim, E.-c. Jeon,
Journal of the Korean Society of Manufacturing Process Engineers (2020)
26. A study on size variation of quadrangular pyramid structure according to input voltage of solenoid indentation system
S.H. Moon, J.-Y. Jeong, J.-S. Han, D.-S. Choi, S.-D. Choi, E.-c. Jeon, T.-J. Je,
Journal of the Korea Society of Die & Mold Engineering (2019)
25. Analysis of Size Effect of Nano Scale Machining Based on Normal Stress and Indentation Theories
E.-c. Jeon, Y.-H. Lee, T.-J. Je,
Journal of the Korean Society of Manufacturing Process Engineers (2018)
24. Analysis of Mechanical Properties of Polymer Material for Clear Aligner using Uniaxial Tensile Test
J.-Y. Jeong, T.-J. Je, E.-c. Jeon,
Journal of the Korean Society of Manufacturing Process Engineers (2018)
23. Realization of 3D Image on Metal Plate by Optimizing Machining Conditions of Ultra-Precision End-Milling
J.-R. Lee, S.H. Moon, T.-J. Je, J.-H. Jeong, H. Kim, E.-c. Jeon,
Journal of the Korean Society for Precision Engineering (2016)
22. Forming Properties of Micro Random Pattern Using Micro Abrasive Paper Tool by Roll to Plate Indentation Method
J.-Y. Jeong, T.-J. Je, S.H. Moon, J.-R. Lee, D.-H. Choi, M.-J. Kim, E.-c. Jeon,
Journal of the Korean Society for Precision Engineering (2016)
21. Study on Ductile Machining Technology for Manufacturing Nano-Patterns on Single Crystal Silicon through Quantitative Analysis of Thrust Force
D.-H. Choi, E.-c. Jeon, M.-A. Yoon, K.-S. Kim, T.-J. Je, J.-H. Jeong
Journal of the Korean Society for Precision Engineering (2016)
20. Machining Characteristics of Micro Structure using Single-Crystal Diamond Tool on Cu-plated Mold
C.-E. Kim, E.-c. Jeon, T.-J. Je, M.C. Kang,
Journal of Korean Powder Metallurgy Institute (2015)
19. A Study on Manufacturing Method of Nano-Micro Hybrid Pattern Using Indentation Machining Method and AAO Process
H.-H. Kim, E.-c. Jeon, D.-H. Choi, W.-K. Jang, Y.-M. Park, T.-J. Je, D.-S. Choi, B.-H. Kim, Y.-H. Seo,
Journal of the Korean Society for Precision Engineering (2015)
18. Machining of Specular Hologram using End-mill Technology
E.-c. Jeon, J.-H. Cha, J.-R. Lee, H.-J. Choi, C.-E. Kim, T.-J. Je, H. Kim, D.-S. Choi,
Journal of the Korean Society of Manufacturing Process Engineers (2014)
17. Fabrication of uniform micropattern arrays using nonionic surfactant-based wet etching process of high purity aluminum
W.-K. Jang, E.-c. Jeon, D.S. Choi, B.H. Kim, Y.H. Seo,
Journal of the Korean Society of Manufacturing Process Engineers (2014)
16. Fabrication and analysis of optical micro-pyramid array-patterns
J.-R. Lee, E.-c. Jeon, T.-J. Je, S.W. Woo, D.-S. Choi, Y.-E. Yoo, H. Kim,
Journal of the Korean Society of Manufacturing Process Engineers (2014)
15. Analysis on Specific Cutting Resistance Variation by Tool Angles Based on a Concept of Representative Stress
E.-c. Jeon, H.-J. Choi, K.-M. Lee, Y.-H. Lee, T.-J. Je, J.-H. Kim, D.-S. Choi,
Journal of the Korean Society of Manufacturing Process Engineers (2014)
14. Development of Hybrid Machining System and Hybrid Process Technology for Ultra-fine Planing and Micro Punching
H.-H. Kim, E.-c. Jeon, J.-H. Cha, J.-R. Lee, C.-E. Kim, H.-J. Choi, T.-J. Je, D.-S. Choi,
Journal of the Korean Society of Manufacturing Process Engineers (2013)
13. Analysis of Micro Machining Characteristics using End-milling and Its Applications
H.-J. Choi, E.-S. Park, E.-c. Jeon, T.-J. Je, D.-S. Choi,
Journal of the Korean Society for Precision Engineering (2012)
12. Study on Machining High-Aspect Ratio Micro Barrier Rib Array Structures using Orthogonal Cutting Method
E.-S. Park, H.-J. Choi, H.-H. Kim, E.-c. Jeon, T.-J. Je,
Journal of the Korean Society for Precision Engineering (2012)
11. Trends of Flat Mold Machining Technology with Micro Pattern
T.-J. Je, D.-S. Choi, E.-c. Jeon, E.-S. Park, H.-J. Choi,
Journal of the Korean Society of Manufacturing Process Engineers (2012)
10. Prediction of State of Cutting Surfaces of Polymers by Analysis of Indentation Load-depth Curve
E.-c. Jeon, J.-H. Kim, T.-J. Je,
Journal of the Korean Society of Manufacturing Process Engineers (2011)
9. Development of machining technology for non-continuous pattern removing plastic deformation around pattern
E.-c. Jeon, T.-J. Je, S.h. Chang,
Journal of the Korean Society of Manufacturing Process Engineers (2010)
8. A Study on Design of High Luminance Hybrid LED Package and Ultra-fine Machining of Optical Pattern
E.-c. Jeon, T.J. Je, K.H. Whang,
Transactions of Materials Processing (2010)
7. A Study on an Integrated Light Guide Plate
Y.-M. Lee, J.H. Lee, E.-c. Jeon,
Korean Journal of Optics and Photonics (2010)
6. Evaluation of Indentation Tensile Properties for FCC Linear Hardening Materials
E.-c. Jeon, S.-H. Kim, J.-S. Park, Y.-J. Yu, D.i. Kwon,
Journal-Korean Institute of Metals and Materials (2006)
5. Application & Standardization of Instrumented Indentation Technique for Characterizing Material Properties
D.i. Kwon, S.-H. Kim, J.-Y. Kim, E.-c. Jeon, J.-S. Lee, K.-H. Kim,
Journal-Korean Institute of Metals and Materials (2005)
4. Study for True Strain Definition of Indentation Flow Curve Derivation
E.-c. Jeon, M.-K. Baik, S.-H. Kim, J.-S. Park, D.i. Kwon,
Journal-Korean Institute of Metals and Materials (2004)
3. The Optimization of Experimental Conditions of Continuous Indentation Test for Tensile Properties Evaluation
E.-c. Jeon, J.-S. Park, D.i. Kwon,
Journal-Korean Institute of Metals and Materials (2003)
2. Nondestructive Advanced Indentation Technique: The Application Study from Industrial Structure to Nanomaterial
E.-c. Jeon, D.i. Kwon, Y. Choi, J.-i. Jang,
Journal of the Korean Society for Nondestructive Testing (2002)
1. Evaluation of Work-hardening Exponent by Quantitative Analysis of Load-depth Curves
E.-c. Jeon, J.-H. Ahn, D.i. Kwon,
Journal-Korean Institute of Metals and Materials (2001)
